ABOUT, HISTORY BARON 58 COMMUNITY TERMS YOUTUBE BLOG

Prototyping
Wiring Tips
SimVim Test Panel

Wiring

Input Multiplexer header and wires soldersing




Micro "Korry-type" Switch



DM13A LED Driver soldering

As example, using the DM13A drivers in DIP casing, you can solder thin wires directly to the driver pins. Then this driver can be attached to the surface near to the LED group using thermo-glue or 2-side ducttape.

First, the thin (30AWG) solid-core wire is wrapping around the chip pins by tweezers or by special wire wrapping tool.

After that touch every joint with solder and melt it quickly with fully heated soldering iron, making the melted solder leaked into the joint spacing for a reliable connection:



Test Panel wiring





© Copyright 2012-2018 - SimVim