In the real E175  plane are push buttons to change the NAV source.

HSI_Source_GPS is a toggle switch (I can switch between NAV1 and FMS). It will not work in my case, because I need a button.
The same with HSI_Nav_Source. I need push buttons parameters to switch between NAV1, NAV2 and FMS.  The PFD shows LOC1 and LOC2 instead of NAV

PS: The same problem with EFIS_HSI_Mode. I need a push button

Kind Regards
Csaba

asked Aug 2 in Parameter Database by

1 Answer

+1 vote

Csaba,

Yes, I see, the source can be switched with momentary buttons in some aircraft.
Now, you can download updated database file (SimVim.dat) and see the parameter configuration table.

New parameters are included:

HSI_Source_Nav1    => set for momentary button
HSI_Source_Nav2   => set for momentary button
HSI_Source_FMS   => set for momentary button
HSI_Source_3-pos   => change for 3-pos switch
HSI_Nav_Source   => change for toggle switch (Nav1/Nav2)
HSI_Source_GPS   => change for toggle switch (Nav/GPS)
HSI_Sync_CRS   =>    set direct (RMI) course for momentary button

The same parameter are added for copilot HSI/EFIS

Also, you can select EFIS_HSI_Mode (Arc/Rose) as momentary button now too.
_________________

By the way, as I see, in the E175 model both (capt, fo) PFD display the same (pilot only ) information. Also, the Arc mode is not switchable?

Vlad

answered Aug 3 by

Thank you Vlad.

By the way, as I see, in the E175 model both (capt, fo) PFD display the same (pilot only ) information. Also, the Arc mode is not switchable?

In my case I extract only the pilot PFD on to my extra monitor. Maybe it depend on the addon.

...