I am using a DM13A with direct connection to PIN(37). Then a 10 leds bargraph to display the Flaps_Position_Ind. In the configurator, I have set min value to 0 and max value to 1 and I have activated the option 'All Leds Off when value is minimal'. Everything is working well except that when value is minimal all leds are going ON instead of going OFF.

Is it a bug or am I doing something wrong?

Thanks in advance. Eric.
Aug 16, 2019 in General - Configurator by

1 Answer


No bug, checked.

It shouldn't be so. When you set this option, the LED bar graph should be empty. If the option "All LEDs Off " is not set, the first LED stays ON on minimal value.

By the way, entering the value is not necessary for flaps and any other data with range 0..1.


Aug 29, 2019 by