I have a Com/Nav panel that I have built some years ago before I heard of SimVim.
The idea was to use 2 rows of 7-segment displays, both 12 characters long. The physical arrangement is done and cannot be changed. There are 3 MAX7219 controllers, 2 of which are for the 8 leftmost digits of the display rows and the third controller is divided into 2x4 digits for supplementing those 8 digits to 12.
My question would be, how is it possible to display both Com1_ACT / Com1_STB in one row of 12 digits on this setup?
I tried sending multiple data and character shifting on the display, but it didn't work out.
I would greatly appreciate any help.
Thanks in advance.