Hi all, I'm configuring a start switch with a 2 pole 6 throw rotary switch. I define as a 5 position start switch in configuration, but I have two odd behaviors:

- In any state xplane always start in the "L" position

- From the off position to "R" works well, the next movement nothing happens, the next one and the remaining moves works well, but the "L" position cannot been reached

I test it with the upper position pins and with the down position pins, no change

Thanks in advance
ago in Troubleshooting by

1 Answer

0 votes

Jorge,
Check again your connections, all should work, the input program code was not changed in any way since the project start.
Vlad

ago by
...