Hi,

I have just started to program a cabin for b738-Zibo but I cannot starting it with the data.cfg file I have prepared. If I start the zibo with a blank data.cfg it is working but if I have the data.cfg I have copied bellow, the xplane is frezeen. Any help?

Regards,
Jorge

[Conditions]

1 XPDR_MODE
2 AP_ALT_Cmd

[Devices]

N33 D=0 B=1,10 b=3
N32 D=0 B=1,10 b=3

[Input]
...
...
M7.10 EFIS_Map_Mode p=5
...
E8.0 AP_HDG_Set e=1+
E8.3 ND_Zoom_Set
..
..
M38.8 XPDR_OSXAT
M40.0 Air_Temp_Mode p=6

[Output]
...
N32 XPDR_CODE c=C1!0
N32 Display_Text o=5 t="Stb" c=C1:1
N32 Display_Text o=5 t="on " c=C1:2
N32 Display_Text o=5 t="ALt" c=C1:3
N32 Display_Text o=5 t="tSt" c=C1:4
N32 Display_Text o=5 t="gnd" c=C1:5
...
L53 XPDR_LIT_LED
ago in Laminar B738 ZiboMod by

1 Answer

0 votes

Jorge,
First you have many  very old names in your data file, when have you edited it in the configurator last time?

2. Encoder options (speed, type) are assigned in the plugin menu - see the first video here.  No inline "e=.. " needed - it's useless.
3. All configuration for b737 (incl. Zibo) should be set using the image-map, for correct data.
- EFIS_Map_Mode (why you set p= ?)
- Why "ESS_Bus_Source" ?
- Why "DC_Volt_Selector"?  See image map (" use DC_Meter_Sel and AC_..)
... "Air_Temp_Level" ....  etc...

Maybe you left many data entry fro C90/B1900?

3. For transponder - no need any "conditions":

N32     XPDR_CODE
N32     XPDR_Mode_Txt         o=5


.. that's all

XPDR_LIT_LED = XPDR_Reply

4. You can use the switch position directly as condition: c=S38.8:0  (click on assigned XPDR_CODE, select "Conditions --> Input state --> OFF, select input)

Always use the config tool - it's much faster way to create your config (and no mistakes and always fresh data changes, automatically)

And use the latest version (current is 9.47)

Vlad

ago by
0

Thanks Vlad,

You are rigth. I am using the data.log file that I did for the B190 some time ago. It is configured for the Carenado B190 but the main imputs also work for c172 and be58. Thus I can use my homemade B190 cockpit to fly with these ligth aircrafts.

Concerning the version of the log file you are also rigth. I didn't update it. I have just done, this is the rigth one:

[Conditions]

1 XPDR_Mode_Txt
2 AP_ALT_Cmd

[Devices]
N33 D=0 B=1,10 b=3
N32 D=0 B=1,10 b=3
[Input]
B7.0 ND_ARPT
B7.1 ND_WPT
B7.2 ND_VOR
B7.3 ND_NDB
B7.4 ND_TCAS
B7.5 ND_POS
B7.6 ND_DATA
B7.7 ND_TERR
B7.8 ND_WXR
S7.9 EFIS_Power
M7.10 EFIS_Map_Mode p=5
S7.15 Yaw_Damp
E8.0 AP_HDG_Set
B8.2 AP_Heading_Sync
E8.3 ND_Zoom_Set
B8.5 ND_Range_1
E8.6 VOR_Nav1_OBS
E8.8 VOR_Nav2_OBS
E8.8 HSI2_Sel_CRS
T8.10 EFIS_Nav_Src1
T8.12 EFIS_Nav_Src2
S8.14 HSI_Src_Nav
B8.15 GPS1_CDI
S9.0 Rotor_Prerotate
S9.1 Rotor_1_Clutch
T9.2 Elec_Trim_Mode
E9.4 Cabin_VVI_Set
E9.4 Land_ALT_Set
E9.6 Cabin_ALT_Set
E9.6 Max_Altitude_Set
S10.0 Lock_Switch_1
M10.1 Wiper_Speed_4-pos
M10.5 DC_Volt_Selector
S10.11 Compass_Light
S10.12 Dome_Light_Sw_2
S10.13 Seat_Belts
S10.14 Night_Vision_Switch
S10.15 Wiper2_Switch
S11.0 ESS_Bus_Source
B11.1 Bus_Test
S11.2 Panel_Light_Switch
S11.3 Oxy_Pass_Sw
S11.4 Fuel_Pump_Eng1
S11.5 Fuel_Pump_Eng2
T11.6 XFeed_Flow
S11.8 Fuel_Gauge_Aux
S11.9 Fuel_XFR_Test
S11.10 GPU_Switch
S11.11 Inverter_Switch
S11.12 Igniter_ARM_Eng1
S11.13 Igniter_ARM_Eng2
T11.14 Sync_N1_OFF_N2
T12.0 Prop_AF_ARM
B12.2 Start_Eng1
B12.3 Start_Eng2
S12.4 Ice_Vane_Eng1
S12.5 Ice_Vane_Eng2
S12.6 Ice_Vane_Alt_1
S12.7 Ice_Vane_Alt_2
T12.8 ECU_Source_Eng1
S12.10 Prop_AF_ON
T12.11 Window_L_Heat
T12.13 Window_R_Heat
S12.15 Props_Heat   
S13.0 Carb_Heat_Eng1
T13.1 De_Ice_Boots
S13.3 AOA_1_Heat
S13.4 Fuel_Vent_L_Heat
S13.5 Fuel_Vent_R_Heat
S13.6 Ice_Detect
S13.7 Brakes_Heat
B38.0 Master_Cau_Clear
B38.1 Master_Warn_Clear
E38.2 AP_ALT_Set
B38.4 AP_ALT_Alert_Clr
E38.5 AP_ALT_1000
B38.7 AP_Altitude_Sync
M38.8 XPDR_OSXAT
M38.8 XPDR_Mode_Set
B38.13 XPDR_IDT
E38.14 XPDR_1_2_Set
E39.0 XPDR_3_4_Set
E39.2 Baro_Setting
E39.2 PFD_Baro_Set
B39.4 Baro_STD
B39.4 PFD_Baro_STD
S39.5 Prop_Sync
S39.6 Bleed_Air_Source
T39.7 Air_Vent_Level
M39.9 Air_Temp_Level p=5
T39.14 Seat_Belts_3-pos
M40.0 Air_Temp_Mode p=6
S40.6 Air_Temp_Trim
T40.7 Bleed_PACK_L
T40.9 Bleed_PACK_R
T40.11 Bleed_ISO
T40.13 Eng_Start_Select
A0 Parking_Brake
A1 Air_Level_Pilot
A2 Defrost_Air_Level
A3 Set_Temp_A
A4 Set_Temp_F
A5 Air_Level_Copilot
A5 Air_Level_Cabi

[Output]

L2 Yaw_Damper_On
L3 Parking_Brake_Ann
L4 Master_WARN
L5 Master_CAU
L6 AP_ALT_Alert
N32 XPDR_CODE c=C1!0
N32 Display_Text o=5 t="Stb" c=C1:1
N32 Display_Text o=5 t="on " c=C1:2
N32 Display_Text o=5 t="ALt" c=C1:3
N32 Display_Text o=5 t="tSt" c=C1:4
N32 Display_Text o=5 t="gnd" c=C1:5
N33 AP_ALT_Cmd
L53 XPDR_Reply


It is working perfectly for B190, C172 and BE58.

I would like also to fly B737-zibo using some of the input I have on the b190 cockpit and for this reason I used the same data.cfg. But when the aircraft is loaded the sim is freezen.

Are there any possibility to have the same file for configuring B190 and B737 o I have to use different files and change averytime I want to fly one?

Regards,

Jorge

0
Try to find out what line in your config is a cause of this.
(adn take in account my notes about "conditions" an transponder modes).
You do not have the file "simvim_xxx.dat" in the root folder of b738? If yes, delete it.
And, use the latest SimVIm version.
Vlad
...